Push Connector something new in wire connecting
I found a push connector something new in wire connecting. At least it’s new to me. Prior to this my world consisted of wire nuts. Different size wire nuts for different wire combinations. Now I admit that as a homeowner I don’t use this stuff every day. So somewhere along the way, this little device got past me.
What I am talking about is push on wire connectors. I like that I don’t have to look up a table for the wire size and the number of wires that will be connected. No having to have the wires long enough to get all the wires parallel to each other to be able to twist them together. No more cramped tightly packed junction boxes(well, almost no packed junction boxes).
A Review
What makes push connectors special?
If you have replaced a wall switch or electrical outlet you have been exposed to push connectors. These devices have had push connectors since the early seventies. Since 1996 the push connectors on the switches and outlets are intended to be used with AWG #14 wire only. So this push connector is welcome for when you’re working with AWG #12 wire.
Conclusion
As you can see from the above video the push on connectors are very good at what they do. However, they do have some conditions that must be met. The important ones are the amount of wire that is stripped cannot be too long or too short. Also, the use of stranded wire may not be available. This is dependent on the type of push on wire connector. Some connectors are rated for all types of stranded wire. So if you are looking for an alternative to wire nuts and want something simple for connecting your electrical wires here is your solution.
MyBusyRetiredLife.com Site Map
(By Dmitry G (Own work) [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0) or GFDL (http://www.gnu.org/copyleft/fdl.html)], via Wikimedia Commons)
(By Dmitry G (Own work) [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0) or GFDL (http://www.gnu.org/copyleft/fdl.html)], via Wikimedia Commons)